Skip to content
Northline ApparelStart a brief
Specify the whole material system.

How we work · Materials

Specify the wholematerial system.

Face fabric, barrier, backer, lining, insulation, reinforcement, seam tape, zips and trims — chosen as one system, tied to the product mission.

Request swatches

02Laminate peel

Peel a shellapart.

A 3-layer laminate is three decisions bonded into one: the face, the membrane and the backer. Scroll to separate them.

  1. The shell, as deliveredOne system
  2. Face fabricAbrasion, hand and DWR
  3. MembraneThe barrier
  4. BackerProtects the membrane
  5. Three layers, one systemConfirmed on swatches
The shell, as deliveredFace fabricMembraneBackerThree layers, one system

03Planning ranges

The fabric library

Every weight is a planning range from research, not a tested grade or a mill reference. Final choices are confirmed on physical swatches and assembled seam trials.

  • Representative macro of 3-layer waterproof laminate
    FAB-001Planning range

    3-layer waterproof laminate

    Woven face bonded to a membrane and protective knit or woven backer.

    Planning weight
    120–220 gsm
  • —Planning range

    2.5-layer lightweight shell

    A lighter printed or applied inner protection instead of a full backer.

    Planning weight
    Confirm per grade
  • Representative macro of Bonded softshell
    FAB-004Planning range

    Bonded softshell

    Stretch woven face bonded to tricot, fleece or a membrane-backed inner layer.

    Planning weight
    240–380 gsm
  • Representative macro of Stretch double weave
    FAB-005Planning range

    Stretch double weave

    Single-layer double-face woven with a durable outer face and a differentiated inner surface.

    Planning weight
    170–300 gsm
  • Representative macro of Grid fleece
    FAB-006Planning range

    Grid fleece

    Knit with raised grid zones separated by lower channels.

    Planning weight
    140–260 gsm
  • Representative macro of Merino or merino-blend jersey
    FAB-008Planning range

    Merino or merino-blend jersey

    Fine-gauge weft knit intended for next-to-skin or light layering use.

    Planning weight
    145–230 gsm
  • FAB-009Planning range

    Synthetic sheet insulation

    Needled, carded or continuous-filament loft layer used inside an assembled garment system.

    Planning weight
    40–200 g/m² basis weight
  • Representative macro of High-tenacity ripstop
    FAB-012Planning range

    High-tenacity ripstop

    Plain weave with periodic reinforcement yarns forming a visible or subtle grid.

    Planning weight
    90–240 gsm
  • —Planning range

    TPU-laminated weldable fabric

    Listed for cuff, instep, knee and seat zones and for wet, exposed weather.

    Planning weight
    Confirm per grade

Representative macros and planning ranges — not mill grades or tested values

04Before you enquire

Questions to resolvebefore sampling.

Can a fabric rating guarantee finished-garment performance?

No. The target, article, method, pass criterion and finished construction must be agreed and supported by exact results before a public statement is made.

Does a low shell weight prove comfort?

No. A low shell weight or a branded membrane does not by itself prove comfort during high exertion.

05Start a brief

Bring us the mission —not just a garment name.

Share the family, the quantity and where it is going. Your brief pass fills in as you type; send it and we reply with the next step.

Company, destination & other contact options
Use WhatsApp instead
Your contact details and product brief are used only to prepare and follow up this quote request.

The pass is a summary of your brief · nothing is sent until you submit